SF40 HSW
Frameless, single glazed moveable wall system
SF50 HSW/SF50c HSW
Non-insulated aluminium moveable wall system
SF55 HSW/SF55c HSW
Thermally broken aluminium moveable wall system
SF40 HSW
Frameless, single glazed moveable wall system
The SF40 HSW (horizontal moveable wall), frameless all-glass solution is without vertical framework offering clear uninterrupted panoramic views. The SF40 HSW provides a creative answer for facilities requiring a physical, but not a visual barrier.
The SF40 HSW system will enhance any project and can be integrated easily into any building design, presenting unlimited possibilities of organising space, especially in commercial environments. Glazed partitions suitable for any room divider office, hotel, bank, school, church, restaurant, bar, café, shopfronts, car showroom, swimming pool or shopping mall.
SF50 HSW/SF50c HSW
Non-insulated aluminium moveable wall system
The SF50 HSW (horizontal moveable wall) is a non-insulated aluminium framed panel. The system can also be offered as the SF50c HSW benefiting from the natural beauty and warmth of real timber clad to the inside. Each panel, when closed, provides a continuous seal with its neighbouring panel ensuring greater structural stability and security, in addition to improved noise reduction and energy saving.
The SF50 HSW and SF50c HSW systems will enhance any project and can be applied easily into any building design, presenting many possibilities of organising space. Suitable for use as partition walls and for commercial applications, including pool enclosures, restaurants, churches, and shop fronts.
SF55 HSW/SF55c HSW
Thermally broken aluminium moveable wall system
The SF55 HSW (horizontal moveable wall) combines light-weight aluminium with an unrivalled 24mm patented shaped polyamide thermal break. This provides a compact profile width of only 55mm, in addition to narrower sightlines maximising glass area, while ensuring optimum heat insulation and effective weather performance that is able to endure most situations.
The SF55c HSW represents the very best of both worlds without compromise. Enjoy the benefits of the low-maintenance and thermal efficiency of aluminium and the natural beauty and warmth of wood.
The SF55 HSW and SF55c HSW systems compliment any project and can be integrated easily into a building project, offering vast possibilities in organising space. Ideally suited to commercial environments, suitable as any room divider (or sliding wall), office, hotel, bank, school, church, restaurant, bar, café, shop front, car showroom, swimming pool or shopping mall.
SF40 HSW
Panels, when opened, can be stored in a separate parked position or stacking bay depending on individual requirements.
SF50 HSW/SF50c HSW
Panels, when opened, can be stored in a separate parked position or stacking bay depending on individual requirements.
SF55 HSW/SF55c HSW
Panels, when opened, can be stored in a separate parked position or stacking bay depending on individual requirements.
SF40 HSW
The manufacturer recommends panel widths do not exceed 1000mm and a maximum height of up to 3000mm. Heights greater than this can be achieved; please contact our technical department for advice.
SF50 HSW/SF50c HSW
The manufacturer recommends panel widths do not exceed 1000mm and a maximum height of up to 3000mm. Heights greater than this can be achieved; please contact our technical department for advice.
SF55 HSW/SF55c HSW
The manufacturer recommends panel widths do not exceed 1200mm and a maximum height of up to 3000mm. Heights greater than this can be achieved; please contact our technical department for advice.
SF40 HSW
Glass panels which have been drilled and mechanically clamped and bonded top and bottom with a slender aluminium rail. The SF40 HSW can be used in conjunction with SF50 HSW, enabling single doors to be incorporated within a panel.
SF50 HSW/SF50c HSW
The SF50 HSW profile is constructed from a strong light-weight aluminium extrusion. The minimal framework is offered as a square edge profile. The SF50c HSW benefits from the strength and stability provided by aluminium. And combines it with the natural charm and beauty of timber to the inside, providing the very best of both worlds with a choice of timber profile shape to suit. All timber is sourced from sustainable forests. The standard timbers are Meranti (hardwood) and Nordic pine (knot-free softwood), while other timbers such as American white oak are available by special order.
SF55 HSW/SF55c HSW
The SF55 HSW profile is constructed from a strong aluminium extrusion. This has been thermally broken by a 24mm polyamide insulation bar, guaranteeing it optimum resistance to combat heat loss and condensation. The minimal framework is offered as square edge profile. The SF55c HSW benefits from the strength and stability provided by the aluminium. combining the natural charm and beauty of timber to the inside, providing the very best of both worlds with a choice of timber profile shape to suit. All timber is sourced from sustainable forests. The standard timbers are Meranti (hardwood) and Nordic pine (knot-free softwood), while other timbers such as American white oak are available by special order. As an additional feature should in the future you wish to change the timber type or finish to the inside, you can simply order a replacement set of timber frames which can be easily interchanged.
SF40 HSW
The top suspended track and rail can be concealed within the ceiling and is therefore entirely without the need of a bottom track, with only floor press stud sockets to accommodate the shootbolt locking rods, leaving an uninterrupted floor surface, bottom track option is available if required.
SF50 HSW/SF50c HSW
The top suspended track and rail can be concealed within the ceiling and is therefore entirely without the need of a bottom track, with only floor press stud sockets to accommodate the shootbolt locking rods, leaving an uninterrupted floor surface, bottom track option is available if required.
SF55 HSW/SF55c HSW
The top suspended track and rail can be concealed within the ceiling and is therefore entirely without the need of a bottom track, with only floor press stud sockets to accommodate the shootbolt locking rods, leaving an uninterrupted floor surface, bottom track option is available if required.
SF40 HSW
When closed, individual panels interlock together and are locked into position by drop shootbolts rods into the floor. The first opening panel may incorporate a locking block plate, if required.
SF50 HSW/SF50c HSW
The standard locking system offers a very high level of security, with a quick, smooth and easy operation. Each panel incorporates a bottom shootbolt mechanism which is concealed within the framework and operated by an internal flush handle. The shootbolt rods are manufactured in aluminium and linked by a corrosion resistant cam. They are capped with glass fibre reinforced polyamide cones to prevent any damage. When closed each panel interlocks with its neighbouring panels by continuous gasket seals. All systems are internally glazed as standard for improved security. Key locking can be integrated in the first opening panel or lead door with a five-lever profile cylinder. This can be fitted to either the inside only or both internally and externally as required, additional locks can be added at every handle point for higher security.
SF55 HSW/SF55c HSW
The standard locking system offers a very high level of security, with a quick, smooth and easy operation. Each panel incorporates a bottom shootbolt mechanism which is concealed within the framework and operated by an internal flush handle. The shootbolt rods are manufactured in aluminium and linked by a corrosion resistant cam. They are capped with glass fibre reinforced polyamide cones to prevent any damage. When closed each panel interlocks with its neighbouring panels by continuous gasket seals. All systems are internally glazed as standard for improved security. Key locking can be integrated in the first opening panel or lead door with a five-lever profile cylinder. This can be fitted to either the inside only or both internally and externally as required, additional locks can be added at every handle point for higher security.
SF40 HSW
With minimum distance between glass panels, top and bottom twin PVC brush piles, effective draught proofing is achieved.
SF50 HSW/SF50c HSW
The top and bottom seals consist of twin nylon brush piles. The double gasket seals between the door panels are continuous and of superior quality (consisting of long-lasting EPDM).
SF55 HSW/SF55c HSW
The top and bottom seals consist of twin nylon brush piles. The double gasket seals between the door panels are continuous and of superior quality (consisting of long-lasting EPDM).
SF40 HSW
A top running system with an operating mechanism that consists of horizontal polyamide wheels with double-sealed ball bearings. Provide continued quiet, quick and easy, smooth operation and long life.
SF50 HSW/SF50c HSW
A top running system with an operating mechanism that consists of horizontal polyamide wheels with double-sealed ball bearings. Provide continued quiet, quick and easy, smooth operation and long life.
SF55 HSW/SF55c HSW
A top running system with an operating mechanism that consists of horizontal polyamide wheels with double-sealed ball bearings. Provide continued quiet, quick and easy, smooth operation and long life.
SF40 HSW
Depending on specification 6mm, 8mm or 10mm toughened safety glass, manufactured to BS EN 12600 standard can be used, this can be tinted or obscured if required.
SF50 HSW/SF50c HSW
The system can accommodate triple glazing. Our standard 28mm unit comprises of 4mm clear toughened glass to the inner pane x 16mm argon gas cavity x 4mm neutral antisun toughened glass, providing an enhanced thermal efficiency, with a centre pane U-Value of 1.0W/m2K to comply with Building Regulations for safety and thermal efficiency. All sealed units are BS kite marked, manufactured to BS EN 12600 and BS 5713:1979 standards. IDSystems offer a wide choice of glazing options, including internal venetian or pleated blinds which can be incorporated inside the glazed unit. These are very popular, especially on internally opening systems where curtains are not practical.
SF55 HSW/SF55c HSW
The system can accommodate triple glazing. Our standard 28mm unit comprises of 4mm clear toughened glass to the inner pane x 16mm argon gas cavity x 4mm neutral antisun toughened glass, providing an enhanced thermal efficiency, with a centre pane U-Value of 1.0W/m2K to comply with Building Regulations for safety and thermal efficiency. All sealed units are BS kite marked, manufactured to BS EN 12600 and BS 5713:1979 standards. IDSystems offer a wide choice of glazing options, including internal venetian or pleated blinds which can be incorporated inside the glazed unit. These are very popular, especially on internally opening systems where curtains are not practical.
SF50 HSW/SF50c HSW
Designs can be customised according your preference. The options include mid-rails, mullions, plant-on bars with dummy spacer grids, deeper top and bottom profiles and solid in-fill panels, among many others.
SF55 HSW/SF55c HSW
Designs can be customised according your preference. The options include mid-rails, mullions, plant-on bars with dummy spacer grids, deeper top and bottom profiles and solid in-fill panels, among many others.
